The correct installation method of glass fiber sound-absorbing board：

1. Preparation stage:

Before installing the sound-absorbing panel, the installation area needs to be thoroughly inspected to ensure that the wall is clean, flat and free of moisture. Uneven or damaged walls should be repaired first. At the same time, the specific size of the required material is measured, and the sound-absorbing board is cut according to the actual area to avoid waste.

2. Installation process:

2.1 Positioning and marking: according to the design requirements, determine the installation position of the glass fiber sound-absorbing board, and make accurate marks on the top surface of the wall.

2.2 Fixing method selection: the glass fiber sound-absorbing board can be fixed in a variety of ways, including gluing, pinning or using a special hook. Choosing the right fixation method depends on the wall material and specific needs.

2.3 Step by step installation: starting from one corner of the wall and gradually installing to the other corner to ensure that each board is closely jointed without obvious gaps.

2.4 Treatment of joints: For the joints between the board and the board, special seam tape can be used to treat, to ensure the overall sealing and aesthetic.

2.5 Check and adjustment: During the installation process, regularly check whether the installed part is smooth and firm, and adjust it in time.

3.Precautions:

3.1 Maintain ventilation: During the installation process, it should be ensured that the indoor space has good ventilation to avoid affecting health due to the inhalation of glass fiber particles.

3.2 Safe operation: when using tools, pay attention to safety to avoid causing harm to the plate or itself.

3.3 Moisture-proof treatment: if the installation environment is humid, the moisture-proof layer should be added on the wall to extend the service life of the sound-absorbing board.

3.4 Cleaning and maintenance: after the installation is completed, clean the site to ensure that the surface of the sound-absorbing board is clean. Perform regular maintenance to maintain its sound absorption performance.

Installation diagram of hanging board